Last tested: 27 01 2023

To setup Ezviz camera, it must be connected to the local network via Lan connection.
After connecting the camera to the local network, please add the camera to your Ezviz account.

Install Ezviz studio to add the camera and for advanced configuration.

Once Ezviz Studio is installed we need to edit a configuration file to allow aadvanced configuration changes on the camera via the lan connecetion.

Navigate to c:/Program Files(x86)/Ezviz Studio/Config/ directory.

In this directory there is an ini file that holds the configuration for Ezviz Studio.
Right click on the file and select "Open with" then choose Notepad.

This will open the ini Configuration file for editing.

In the ini file, add the following  lines after  all the other lines of configuration.  

[LocalOperation]

Show=1

Next we will save the file.
When you save the file make sure that the File type selected is "All File Types" and not txt.
Save the file to the desktop as windows will not allow you to overwrite an ini file directly from Notepad.

Copy the newly saved ini file from the desktop to the Ezviz Studio config directory and overwrite the original ini file.

Restart your Ezviz Software and the new configuration will be applied.

From Ezviz Studio , Login to your Account and Select "All Devices"
This will detect all the devices that are connected to the Network via Lan cable.
Under each device that has a lan connection, An option for "Advanced Configuration" will be available.

Click on Advanced configuration to access and edit Network configuration details.
From this menu option we have the Ability to set the IP Address to Static and specify a specific IP Address or we can simply retrieve the current ip address by inspecting this menu option.

The Substream url is :

rtsp://admin:VERICODE@ipaddress:554/streaming/channels/102


For additional reference please refer to  these guides.